There is no replacement for displacement. Yea, it's cliché, but it's true. If you are looking to increase the displacement of your motor, or if you need to repair a damaged cylinder, you may need to have it bored by a machine shop.

What Alba's Machine Shop Will Do

Send us your cylinder and we clean it, surface it, then bore it to the size of your piston. If you don't have a piston we can supply you with one. If you are unsure of the size you need we will measure your cylinder and let you know. We then hone it with our line bore machine.  Many other motor shops use a hone attached to a drill. The line bore creates a more precise fit for a better seal and ring seating. We will then file fit your rings so they have the perfect gap.

You end up with is a piston that is fitted perfectly to your cylinder, a hone that offers superior seal and break-in, and a perfectly setup ring end gap which prevents unnecessary air seepage.  This all boils down to maximum reliability and horsepower.

The cost for this service is $85 per cylinder plus return shipping if needed.  

(Note we will not bore a cylinder without a piston. Piston sizes are not totally acurate, they are usually 1-3 thousand’s off in size. We prefer to measure from the actual piston before we begin to bore.)

For Information on Alba's
Machine Shop Services and
to receive a quote on a specific job....

Contact: Alba Performance
Email: performance@albaaction.com
Phone: 858.413.2556