Warrior - Ready to Rock!
Michael Shea

Here's my 2001 Yamaha Warrior. Renthal bars, Pro Grip atv grips, ITP Holeshots front and rear. AC Racing front bumper, 6-pack rack, skid plate, nerf bars. Open airbox, K&N filter, Pro Design billet adapter, K&N jet kit. DEI tape-wrapped FMF Hi-Flow head pipe and FMF Power Core 4 slip-on exhaust. Barnett Kevlar clutch kit w/ springs. Setrab oil-cooler with AN 6 braded steel lines, aircraft aluminum and stainless steel fittings and stainless tubing. Oil cooler adapted from 1987 Yamaha Big Bear.

Oh Yea! Lookin' Good
Excellent Custom-Painted Raptor
Mike Wieser

Here are two photos of my 660R for your gallery.

This Ain't No Graphics Kit
Custom Painted Raptor
Titus D Cartwright

This my new Raptor 2004 I just custom painted it. Tell me what you think Titus.D.Cartwright@usa.dupont.com

woah. Woah! WOAH!
Roostin' in the Back Yard
Joshua Hanson

here i am roosting in my back yard. only mods to this is yoshi bumper, nerf bars, exhuast, and their sticker kit.

Stuck But Good!
Gtbikesj4@aol.com

This is Me and My Friends Getting Stuck.

I'm Not Gettin Off Of It, Just Take the Picture!
Silver Lake Dunes
Chris Raymer

My Z has suzuki factory skids front bumper air scoops and water pump guard and the yoshimura off road pipe K&N ait filter the works shocks tag f2 handle bars and many other little things here and there, in the pic im at silver lake sand dunes

Bone Stock Ain't Too Bad
LTZ400
Danlorn@

Flyin' High
Team Alba Racing's
JR Tingley

Top Gun Team Shoot-Out In Washington State.

See More Action!

Raptor Needin Some New Alba Graphics!
Sam AKA "Harley"

04 Raptor Lrd Chrome Exhaust GYT-R Skids, Oil Filter & Water Pump Cover, Starter Cover, Heel & Frame Guards, and Throttle Cover Tucker 1-1/4 Swing Arm Burgard +2 A-Arms SideWinder Ti-Moly Chain and Sprockets HiPer Wheels 20x11-9 Kenda Knarlys a lot of Billet and Chrome Parts.

Raptor Catchin' Air at Gordon's
Gordon's Well
Nole English

This 2002 Raptor has: Big Gun system, Proflow Kit, Alba ProComp front suspension, One of the first Alba flame graphics. Custom cut front and rear fenders, Renthal bars, GYTR heel plates, Trail Tech bar clamp and Lights, MSR Shorty clutch lever. The original custom flame grill that Alba got ideas from. Steel braided lines and custom front bumper + numerous chrome accessories.

The bike has been drastically changed since picture was taken.

It's a Girl Thing
Any girl that has a banshee like this is OK with us!
Chrisy Rogers

This is a pic of my Banshee. Mods include new UFO plastic, Alba tribal flame graphics kit and seat cover, FMF pipe and silencer, twist throttle, DG polished bumper, rear skid plate, ITP polished rims, Holeshot tires, FMF boost bottle, and Boyesen reeds. Future additions include Alba flame grill and billet clutch cover and water pump cover. Thank you and I love ALBA products.

If you can't decide, get one of each!
YFZ450 & Raptor
Ian Coley

’04 Yamaha YFZ450, just purchased late Sept. ’03. stock for now, but soon getting an alba pipe, filter, & jet kit.

’03 Yamaha Raptor, Trail tech 50W spot and 50W Flood lights with endurance computer on billet dash, down one tooth in front sprocket, Alba pipe kit, air filter, jet kit, Alba pro comp chrome A-arm kit, werks triple rate front shocks with res., stainless brake lines, custom headlight covers, billet flame front bumper, billet flame gas cap, next mod to be Alba +4 anodized chrome swing arm kit, with rear shock. ITP front and rear rims, with ITP sand star front and rear tires.

That Quad's Only Got 3 Wheels!
Ryan Howard

I just baught this off of my dad and it has to be one of the nicest 350x's i have ever seen. it is compleatly stock but ill have a RCM pipe pretty soon plus some razr's for the rear.It has no problem beating raptors eaither.

Not Stock - 03' Limited Edition Banshee!
Ontario Canada
Kalvin

hi im kalvin this is my 03 limited addtion banshee. In this pic it is stock but i just got pro circuit pipes, renthal bars and silencers for it they make a nice difference.

Tearing it up in the neighborhood track
Honda 300EX
Jeremy

This is me on my brand new honda 300ex and in 1 of my friends tracks that his dad made in Sauk village ,Illinois .I am 13years old and my quad is still stock but about to get some dg skid plates and a white brothers exhaust.

Yea! This baby kicks some butt!
Smokin White Z400
Danny

This is my z400,it has elka no preload shocks front and back,jd performance a-arms, .It also has a dura blue axle, renthal fat bars,ac nerfs,hmf full exhaust, kenda klaws front and rear, and the great looking alba bumper .Mods for this winter will be the alba race graphics(like Korys when he rode a z400) jd performance swing arm,new tires w/ bead locks,440 motor , head porting,fcr carb,dyna fs and a set of cams.And also frame reinforcing w/ a fresh powder coat.

Traded in the Raptor...
Honda 400EX
Ryan Wolfe

My name is Ryan Wolf and here is my 2001 Honda 400ex.
I just sold my raptor for this and I'm very proud of
my decision. My Raptor is also on your customer quads
site.
Good thing Alba now offers parts, graphics and accessories for the 400ex!

South African Quad Racing
Yamaha Blaster
Ryan Gunther

My blaster has spacers up front and some motor mods and best of all DGS bumper and nerf bars.

Predator
Matt

This is matt. I'm 18 and i have a 2003 polaris Predator. Here is a pic of me catching some air.

ALBA Z400 in Orbit!
Glamis
P.J.

This is me and my Alba Z400 at Glamis. Having fun.

Faster Blaster!
Gage Barnett

Here is my 2001 blaster, it is pretty much stock, but soon to have pipe, silencer, better carb , holeshots k&n air filter , blue grips, shocks, and I also would like a flame graphic kit, any information about a graphic kit, email me at quadrider999@hotmail.com I also drag race it, and I am pretty good with a stock blaster, and i was wondering, if ALBA could make a flame 2001 flame graphic kit

Street Legal KFX
carolaloebl@

Here's another reason (aside from Octoberfest and the Autobahn) why it could be cool to live in Germany. This KFX is street legal - see the photo with the licence plates!

Vintage Cool
1996 Alba Banshee with Yellow Ricochet Kit
Ted Wells

These are the pictures of my 1996 Yamaha Banshee. Mods are FMF pipes and silencers, Boost bottle, Power Reeds, Vito's Power Pistons, and of course the Team Alba Graphics Kit.

Hey, we still have this cool Yellow Streak Graphics Kit Available. If you've got an older quad and want to give it a clean new look, you should consider throwing on a new graphics kit.

Flyin' ALBA YFZ450
Devil Dunes, Idaho
Russell

Hhere is a photos of my alba YFZ 450 with tag handle bars, tag grips, motion pro twist throttle, Curtis Sparks X-6 (not shown) full
exhaust, jet kit, and dsp power now! devils dune in idaho 3rd gear 634
feet straight up

Real Tough Looking DS!
With a long list of performance mods.
John Jensen's aka Johnny Airtime!

I've built this thing for Baja and desert with an occasional need to hit the dunes. Simply an amazing quad stock, but with a few tricks and some bolt on equipment. It really livens up!!! Here's my specs http://www.johnnyairtime.org/project-DS650.html

- Rear OEM black plastic, - Alba Graphics and seat by Ceet in Vista, CA, - IMS 5.0g desert tank, - Denton Adjustable steering stabilizer, - Works triple rate front shocks w/ res., - Alum radiator shrouds, - HID 3.5" lights by HIDStore, - HID Hella main light and custom mount, - PPD airbox, - 37t rear sprocket, - 17t countershaft sprocket, - Ron Woods exhaust, - Jet kit and Twist throttle, - Stock carb with mods, - K&N Airfilter and precharger, - ITP Holeshot tires front and rear, -Sand skate II paddles on Douglas wheels w/rimsavers (for the dunes!), - Magellan Meridian Platinum GPS and RAM mount, - LED rear brake/running light, - TBR 2" over steering stem, - Pro Taper bars, - Acerbis Rally Hand guards, ASR top adjustable A-Arms with new Heims, - PRM Pan Skidplate, - PRM rear six pack rack and grab bar, - IMS Roll Design footpegs, - Powder coated rear shock spring, - Powder coated fender braces, - Powder coated wheels, - custom rear fender mounts, - custom right footpeg and brace/guard, - custom front light mounts, - custom cut rear fender, - re-mounted coolant bottle, - custom rock guards for HIDs. (pictures don't show all current mods)

Big Blue DS650
Tim King
Longview, TX

Heres my finished ALBA DS

Looks More Like A Rippin' Banshee
ripponhonda@aol.com

This is a pic of my custom built banshee. Everything is either powdercoated, polished or chromed out. Your kit looks SWEET on my bike. I get a lot of compliments. Everybody thinks we bought your Alba banshee! No offence, But my Banshee looks better than the one you have on your site. Would you be willing to put this one up on your site? I'd really like that since I put so much time and effort in to it.

Here are the mods; Toomey T5's,Works Performace Shocks all around,Lazer Stars, Renthal Bar, Drag race port job(Done myself),Advance timming,lightend flywheel,milled head(upgraded to Coolhead),33mm PWK Carbs, K&N Filters,V-Force Reeds,Wiseco Pistons (P3's),Modifed tranny gears,Trued and welded Wiseco Crank, +4 Swingarm,Alba Clutch, Alba Quick Shift Cam and one KILLER Graphics KIT!!!