This is my alba warrior. It has an FMF
exhaust, AC bumper and grab bar, DG nerf bars, Lonestar
swingarm, Renthal handlebars, Holeshot xc rear tires
on Douglas red label wheels, Razr 2 front tires, UM
swingarm and a-arm skidplates, Lonestar rear brakes,
K&n filter and jet kit, and an Msr clutch lever.
Sweet
04 Warrior Chris Passeger, Puyallup WA
I have put a lot of wrench time into
my 04 warrior. I think it has turned out lookin like
a good bike, butt im not done yet. Just a few more goods
here and there then im movin up to a bigger bike. THANKS
ALBA
260
Blaster Teddy Telatovich
This is my 2002 yamaha blaster. the engine
is bored out with new piston and cylinder. it has a
toomey B1 pipe and silencer, DG bumper and DG nerfs...
kill switch, jets, widened front suspension, shock covers,
K&N filter w/filter box removed, two halogen lights
and more...
Smokin'
Asphalt Drag Banshee Frank Lioy from crestview
motor sports
400cc stroker motor, nitrious express
system 20hp shot, pro design coolhead with19cc domes,
reed spacers, 34mm pj keihn carbs with k&n clamp-ons,
pro design adjustable timing plate, marvin shaw struts,
10 inch swing arm, american racing tires 20x8x10 on
douglas 125, dyna ignition, team alba heavy duty hinson
clutch and springs, pro design aluminum water propeler,
albas exhaust hangers and clamps, steel braided brake
lines front and back
here is video of me at the track I'm in the near lane. Check
it out
TT
660R Raptor dustin.alldridge
Here is a picture of my 2003 Raptor. I
am planning on have a 12:1 piston put in it this winter
as well as having the head ported and polished. I will
then be in the market for some suspension. I have won
1 of my first 5 races and have finished second in the
rest of them. This is my first year racing ST/TT and
I have been running in the Open Pro-Am classes. I don't
think it's to shaby for a beginer racer who has never
raced anything more than my brothers 2003 Polaris Scrambler.
Plus my quad is pretty much stock. I have AC racing
front bumper and nerfs, pro-design filter and pro-flow
system, with a LRD full exhaust system.
Matt's
2003 Banshee Matt Howe, NE PA
I’m from Northeast PA. Here’s
some of the stuff I have on my banshee: Renthal Handle
bars, FMF sst exhaust, V Force 2 Reed Cages, Billet
Reed cage spacers, Alba banshee six pack rack, Stage
3 Dynojet Kit, DG Nerf Bars, Aluminum Grill Cover, Eyeball
headlight covers, Flame sticker kit, AC Racing Skid
plates
Investment
in Bling! Tyce Bonjorno, San Diego
I bought this new and tore it down with
only three hours on the motor.
All parts were purchased at Alba (thanks to Roy) Way
too much to list! Everything is either chrome or polished!
German
Z400 Chris Wittman
Chris sends us his Z400 all the way from
Starnberger See, Germany.
Joe's
Blaster Joe Dusenbery
This is my 2002 Yamaha Blaster she has
chrome Toomey pipes, its jetted,has a k&n air filter,
and some no fear stickers
Why
Have A Snowmobile? Jake Marquette
This is my 01 660R,I live up in southern
minnesota and when it snows I walk
right past my snowmobile and get out my raptor and hit
the snow.I am gonna
mod out my raptor with alba parts this spring.Keep up
the good work!
i race my warrior at budds creek now
i am thinking about buying a yfz450 from you guys it
is a really good deal when i get it i should be runnin
in the top 5 at budds
Banshee
Smokin' em! Nickxc7
The fastest quad in the area, my banshee
sports an alba flames graphics kit and seat cover as
well as matching chrome flame grill, UMI handle bars
with a nacs clamp, armadillo front bumper, shock covers
by shockwears, douglas .190 rims with RAZRs all the
way around, durablue eliminator, pro peg nerfs, FMF
SST pipes and silencers, V force reeds, pro flow intake,
boost bottle, tors elim. kit, The motor has a "play/drag"
port that utilizes vitos superstock pistons, the crank
is trued and welded, the head has been shaved, the cases
are matched, the flywheel is lightened, the timing is
fully adjustable from stock to +7 and this thing rips!!!
nothing compares to the all out POWER of a banshee!!!
especially a moded banshee...
Pikes
Peak Z400
Ken Stouffer
Just wanted to thanks to everyone there
at Alba for building me a great motor for the Pikes
Peak International Hill Climb. The motor worked perfect
each day of the event. Thanks, Phil, for rescuing my
motor from Yoshimura and hooking me up with the Big
Kahuna 470.
Includes:
Alba built 470 (loaded) - Alba Full Exhaust (sounds
GREAT!) - Elka triple rate fronts, double rate rear
Dura Blue X-33 axle w/billet hubs - Dura Blue sway bar
- Suzuki nerf bars - Lonestar +2 a-arms
Modified factory swingarm and bearing carrier - Galfer
Wave brake rotors - Lectron 40mm powerjet carb
Hiper 10x10 and 10x5 wheels - Hoosier skins - Alba airbox
adapter w/K&N - MSR Clutch lever
MSR Handlebars - Galfer braided brake lines - Sidewinder
sprockets 15/37 - D.I.D 520 ERT chain
Alba Racing Graphics Set w/gripper seat cover (Dig it)
- Maier Kill Switch - NOSS Machine Billet bar clamp
- Fullbore radiator shroud w/ billet grille - Fullbore
Headlight insert - Dyna FS ignition
PWR Aluminum Radiator - PEP Steering Stabilizer - Dura
Blue lowering kit
That's just about it.
Looking forward to you guys finding me even more horsepower
for next years race.
Thanks Again,
Ken Stouffer
Pikes Peak Pro Quad #40
Scottish
TRX Gavin Bruce, Fraserburgh,
Scotland
Hey alba, my name is Gavin Bruce, I am
14 years old and I just thought you would like to see
me quad. I live in the North East of Scotland, in a
place called Fraserburgh. I am going to put a axle and
an exhaust. It has a kill switch, nerf bars, Douglas
red label rims on the front, and OMF beadlocks on the
rear.
Predator
Eater Rob Frost
yfz 450 alba graphics kit, alba full pipe
kit (jets k&n), AC racing nurf bars with pegs, tag
bars, tag front bumper, power now, motion pro twist
throttle, more to come.
Seeing
Red Kevin Spousta
This is my 1987 (yes, it's really an '87
I bought new from Alba in October of '89!) Banshee after
3+ months of restoration and customization. It was completely
taken apart and rebuilt to better than new. Every bearing
and seal was replaced and literally every piece of metal
and every bolt/nut/washer was sand blasted clean then
powdercoated, painted, polished or chrome plated.
Cylinder porting by Alba, head mods by
Alba, Toomey T4 pipes, Carbon tech reeds, Wiseco pistons
and crank, TONS of new tranny parts, Alba HD clutch,
Alba 260W stator, custom wiring harness (Thanks to the
Alba service guys for the wiring diagram!) 4 55w Rickey
Stator Aluminator lights, Rickey Stator billet light
mount/bar clamp, Renthal bars/grips, Toomey Whirpull
twist throttle, '99 factory plastics, Ceet seat cover,
ATV Racing J to A arm conversion, Quicksand Racing +2+1
A-arms, Quicksand Racing tie rods, Works dual rate front
shocks w/ Alba covers, Works rebuilt OEM rear shock
w/Alba cover, Douglas red label wheels up front w/Sand
Razors, ITP .190s out back with Sand Skate IIs, Pivot
Works bearings EVERYWHERE, UMI chain slider/rollers,
AC front bumper (not pictured), UMI swing arm skidplate
(not
pictured) Graydon proLine full length frame skidplate
(not pictured) AC cooler rack. I'll send a pic of the
bike once I get the skidplates polished and bolted on.
Thanks Alba! Couldn't have done it without you guys!!
Roostin'
Raptor Jeff Robinson
i have a trinity 727, 35mm fcr's, rpm
billet swing arm, rad titanium axle, lone star racing
titanium +2 a-arms, hardkor front hubs and all 3 brake
rotors by hardkor, yellow full bore plastic, alba water
hoses and dye kit in blue, alba blue brake lines, alba
carbon brake cover in blue, x-factor oil tank, x-factor
air box with special mod, alba front bumper, and alba
gpr steering dampner. it dyon'ed @ 71.6 rwhp.
Kiwi
Raptor Dave From New Zealand
About two months ago we dropped by to
pick up some bits to build up 2 raptors and aa z400
we were shipping back to New Zealand.I would just like
to thank your parts guys for being so helpful and friendly
to a bunch of kiwi's along way from home.The staff went
out of their way to make us feel welcome and even printed
off a map of how to get to the speedway that night.It's
good to know that there are guys like us there, and
we won't hesitate to internet order any future parts
from you.
Keep up the good work, and all the
best
Dave
I have attached a pic of the Raptor
I have just finished, note the radiator and oil tank
position...
Black
04 Banshee Hector
this is my 2004 limited edition banshee.
it has fmf fatty gold series pipes and white brothers
boost bottle and some more mods
Happy
Customer Johnny Thomas
I would like to thank Osscar and all of
Alba action motorsports for the
great service !!!! this is a picture of my new YFZ450
... Thanks again
johnny thomas
Mr
Meaner WE3KINGS3320
Everything not billet is chrome. Powdercoated
frame with Alba shrouds and billet parts with a +4 swingarm.
The motor has a 14/1 piston with cams and some porting.
Its also has a flatslide with a methanol kit and a CDI.
Braded lines slow it down and a dash with a Tach and
a oil pressure gauge looks good and keeps everything
monitored. The seat was custom made and a set of Renthals
with oury grips keep it comfortable. Im building another
that is red and black.(Mr Meaner2)
Saved
Suzuki Michael Brazzon
just restored it from the ground up. these
are the best pics i have. it has shock covers now since
the old ones are beat, new front rims, and a dg bumper.
you site has been great for stock parts that my friend
and i have needed for this quad and others. We bought
this thing pretty beat down for almost nothing and just
fixed it up for the experience and to make a few bucks
but now its gonna be hard to let her go !! anyhow sorry
if i clogged your mailbox just figured ya guys might
wanna see what you help to create with your great site.
Sincerely,
Mike
Swedish
Hydroplane Chrille
After one week I tried this, a brand new
stock DS 650.
Got
an Alba quad that you would like to show off? Send
us a photo no larger
than 800x800 and a description of what you've done to
it and we'll post it here.
Alba reserves the right to decide at our discretion what
will and will not be displayed..
SEND
US PIX OF YOUR ATV 
German
Z400 
Scottish
TRX
Kiwi
Raptor
Swedish
Hydroplane